行業資訊

壓路機租賃整機之后的保養檢查工作

來源：http://www.onlinesoccermanager.cn/ 日期：2022-09-15

壓路機動作靈活準確，操縱方便，平整場地有較高的精度，適用于構筑路基和路面、修筑邊坡、開挖邊溝，也可攪拌路面混合料、掃除積雪、推送散粒物料以及進行土路和碎石路的養護工作。壓路機在工程中使用較多，下面濟南壓路機租賃人員為您講解下壓路機整機保養檢查工作。

The road roller is flexible and accurate, easy to operate, and has high accuracy in leveling the site. It is suitable for building subgrade and pavement, building slopes, excavating side ditches, mixing pavement mixture, clearing snow, pushing loose materials, and maintaining earth roads and gravel roads. The road roller is widely used in the project. The following personnel from Jinan Road Roller Rental Department will explain the maintenance and inspection of the road roller.

1、壓路機在使用施工前應對整個的機械進行多方面的檢查，了解整個壓路機機械的構造。

1. Before using the roller for construction, the whole machine shall be inspected in many aspects to understand the structure of the whole roller.

2、刀軸應每日檢討，假如上面的槽磨出越過了刀軸直徑25，就會轉變。另外，刀軸的運用壽命是鎢鋼銑刀的半衰期。從廣場區域，其性命，龍門銑床5毫米的深度約350-500平方米。但是，有許多因素會影響刀軸的運用壽命，因而每日審查；

2. The cutter shaft should be reviewed daily. If the groove on the shaft is grinded beyond the cutter shaft diameter of 25, it will change. In addition, the service life of the cutter shaft is the half life of the tungsten steel milling cutter. From the square area, its life, gantry milling machine 5 mm deep about 350-500 square meters. However, there are many factors that will affect the service life of the cutter shaft, so they are reviewed daily;

3、4個小時每次運用后光滑的軸承光滑脂。光滑的脂肪、車削和銑削滾筒在玩，在一切軸承油脂涂層；

3. Smooth bearing grease after 4 hours of each application. Smooth fat, turning and milling drums play in all bearing grease coating;
濟南壓路機租賃

4、壓路機的主要的義務是由銑刀，軸承、墊圈、銑鼓，由于長時光的操作歷程和路面摩擦，可以更好的延伸機器的運用壽命；

4. The main obligation of the roller is to extend the service life of the machine better due to the long operation history and road friction of the milling cutter, bearing, washer and milling drum;

5、每次操作前用肉眼檢討機：一切緊固件可以收緊？能否有主要部件磨損或裂紋嗎？石油供給石油可以實現？可以檢討軸承，檢討掩護蓋等；

5. Check the machine with naked eyes before each operation: can all fasteners be tightened? Are there any wear or cracks on the main components? Can oil supply be realized? The bearing and cover can be reviewed;

6、每次操作前檢討壓路機，以及壓路機出租都可以局部緊固件松（一個松懈的必要收緊）

6. Check the road roller before each operation, and the road roller can be rented, and the fasteners can be loosened locally (a loose one needs to be tightened)

7、每次把壓路機出租機支配，檢討刀軸和軸承。假如涌現磨損的軸向地位，您須要更改新的，轉變軸的軸承在同一時光。

7. Each time the roller is leased, the cutter shaft and bearing shall be reviewed. If there is emerging wear in the axial position, you need to change the new, changing shaft bearings at the same time.

壓路機租賃整機之后的保養檢查工作這個問題就講解完畢了，您對此有什么不理解的地方可以隨時來我們網站http://www.onlinesoccermanager.cn咨詢。

The maintenance and inspection work of the road roller after leasing the complete machine has been explained. If you have any questions about this, you can come to our website at any time http://www.onlinesoccermanager.cn consulting service

上一條：壓路機運行時的碾壓原則

下一條：如何做好攤鋪機的整平工作